Operation Manual

18
ENGLISH
Setting the alarm time
1 Press and hold down »ALARM«.
2 Press »HOUR« briefly to set the
hours step-by-step or hold it down
to run through the hours quickly.
3 Press »MIN« briefly to set the mi-
nutes step-by-step or hold it down
to run through the minutes quickly.
4 Release »ALARM« to conclude
the setting.
5 Use the » « slide switch to
set the alarm signal you require
(» « = radio station » « = signal
tone).
– Display: the » « LED lights up,
i.e. the alarm setting is activa-
ted.
– The device switches on at the
set alarm time with the selected
alarm signal.
SETTINGS ________________________________________
Setting the clock
When you switch on the device for
the first time, the time flashes in the
display to indicate that you must set
the clock. The same thing applies
after a power failure, or if the
device has been plugged out and
no back-up battery is inserted.
1 Press and hold down »TIME«.
2 Press »HOUR« briefly to set the
hours step-by-step or hold it down
to run through the hours quickly.
3 Press »MIN« briefly to set the mi-
nutes step-by-step or hold it down
to run through the minutes quickly.
Note:
7
When the minute display
changes from »59« to »00«,
this does not affect the hour
display.
4 Release »TIME« to conclude the
setting.
– Display: the current time.