ǵ COLOR TELEVISION XENTIA 72 ENGLISH 21809-941.
CONTENTS __________________________________________________________________________ 4 XENTIA 72 M 72-400 DOLBY Special features of your TV set Scope of delivery 6 Installation and Safety 8 At a Glance The front of the TV set The back of the TV set The remote control 13 Connection and Preparation Sample connection with video recorder, satellite receiver and decoder Connecting a hifi system or active loudspeakers Putting batteries into the remote control 15 Settings Switching the television on/off Pr
CONTENTS __________________________________________________________________________________ 19 Customer Information Technical data Service information for the specialized dealer Contact assignment for the EURO-AV socket Correcting Problems Yourself ENGLISH 22 3
XENTIA 72 M 72-400 DOLBY ___________________________________ Special features of your TV set Technology Super flat 72 cm colour picture tube (visible picture: 68 cm) 100 Hertz technology GRUNDIG Megalogic Megalogic possibilities: – Perfect compatibility with the Megalogic video recorder. No troublesome programming of channel positions. – By starting playpack on the video recorder, the video programme position on the TV set will be automatically selected. Equipment Dolby Surround * Megatext, level 2.
XENTIA 72 M 72-400 DOLBY ________________________________________________ Scope of delivery 1 TV set XENTIA 72 M 72-400 DOLBY 2 Remote control 3 2 batteries, 1.
INSTALLATION AND SAFETY _______________________________ In order to assure that this high-quality and easy-to-use TV set will be able to provide you with good service and pleasure for a long time to come, it is important that you observe the following points when installing the set. 5x This set has been designed for the reception and reproduction of picture and sound signals. Any other use is explicitly forbidden.
INSTALLATION AND SAFETY___________________________________________________ Do not open the TV set under any circumstance. The manufacturer will offer no liability for damage resulting from unauthorized tampering. Be sure that the mains cable is not damaged at any time. Storms represent a danger for every type of electrical device. Even if the set is switched off, it could be damaged by a lightning strike hitting the mains and/or the aerial lead.
AT A GLANCE ___________________________________________________________________ The front of the TV set P P 8 S-VIDEO VIDEO IN S-VIDEO VIDEO IN L AUDIO R L AUDIO R IO Switches the TV set on/off. –z + Volume –P+ Select channel up/down. S-VIDEO SVHS video input for camcorder. VIDEO IN Video input for camcorder. L AUDIO R Audio input for camcorder.
AT A GLANCE _____________________________________________________________________________ The back of the TV set AUDIO L AV2 AV1 ʋ Mains cable connection socket. AV 1 Euro/AV sockets. AV 2 Euro/AV sockets. R AUDIO L Output sockets for hifi system. É Aerial input (for house aerial).
AT A GLANCE _____________________________________________________________________________ The remote control You can use the TP 810 C remote control supplied not only with the TV set, but also with a video recorder a satellite receiver. TE L E PI L O T 810 C Operating the TV set 1 2 3 4 5 6 Ǽ Switches the TV set to standby. 7 8 9 1…9 0 AV Channel selection and switch on the TV set from standby, select AV position, enter teletext page numbers.
AT A GLANCE _____________________________________________________________________________ TE L E PI L O T 810 C 1 2 3 4 5 6 7 8 9 0 z Ȅ Ƿ OK F P i TV-GUIDE TXT - + -v+ Colour contrast. Brightness. PIP TV picture in teletext. Brief instructions Picture format switch-over Preselection button for various functions. D E AUX PIP AUX VIDEO SAT Operating a video recorder/satellite receiver (see next page) ENGLISH P Picture settings, calls up the »PICTURE SETTINGS« menu.
AT A GLANCE _____________________________________________________________________________ Operating a video recorder/satellite receiver TE L E PI L O T To operate a GRUNDIG video recorder press the »VIDEO« button and hold it down. Then press the desired button. 810 C 1 2 3 4 5 6 7 8 9 To operate a GRUNDIG satellite receiver press the »SAT« button and hold it down. Then press the desired button. 0 P OK Ǽ Switches to standby. 1…0 Select channel positions and switch on from standby.
CONNECTION AND PREPARATION _______________ Sample connection with video recorder, satellite receiver and decoder AUDIO L R AV2 AV1 Videorecorder SAT 2 EXTERNAL / DEC.
CONNECTION AND PREPARATION _______________________________________ Connecting a hifi system or active loudspeakers Instead of using the television speakers as front speakers, you can use the loudspeakers of your hifi system or active front speakers. AUDIO L R AV2 AV1 1 Connect the hifi system or the active left/right speakers to the »L AUDIO R« Cinch sockets. Putting batteries into the remote control 1 Open the battery compartment by pulling off the cover. 2 Insert the batteries (Mignon, i.e.
SETTINGS______________________________________________________________________________ Switching the TV set on/off An LED next to the mains switch indicates the current operating mode by a corresponding colour. Green Yellow Red = = = Operation. Standby (TV-GUIDE mode, copy mode). Standby (energy saving mode, timer programmed). Switching the TV set on 1 Press »IO« on the TV set. The TV picture appears on the screen. Switching the TV set to standby 1 Press »Ǽ« on the remote control once.
SETTINGS ____________________________________________________________________________________ Programming TV channels The TV set is equipped with the automatic tuning system “ATS euro plus” which carries out channel position assignment for you. 1 After switching on the TV set, select he »English« dialog language and confirm with »OK«. Note: If the »Select dialog language« page does not appear, press »i« and then »OK« to display the Dialog Centre menu. ,« or ». .
EASY DIALOG SYSTEM _____________________________________________ The Easy Dialog System Your TV set is equipped with the Easy Dialog System. That means that operating instructions are not, as is usual, in a printed manual, but rather appear on the screen as dialog fields. The Dialog Centre The Dialog Centre is the control centre for your TV set. Here you can make a variety of settings, call up information, and get specific help for operating your television (e.g.
EASY DIALOG SYSTEM_____________________________________________________________ Operating the Easy Dialog System P OK P p, P Move the yellow bar up/down. With two-paged menus, the second page will be turned to. F E OK Change settings. Calls up or confirms selected functions. TXT Back to TV picture. i Acces to the Dialog Centre (with »i« and »OK«), one page back. D Calls up brief instructions.
CUSTOMER INFORMATION __________________________________ Technical data Power supply voltage: 220 – 240 V, 50/60 Hz (control range of the power supply unit 190 … 264 V) Power consumption: in operation, 125 W, in standby 5 W Sound output stage: 2 x 20 Watt music (2 x 10 Watt sine) Reception ranges: ENGLISH C01 … C99, special channels S01 … S41 19
CUSTOMER INFORMATION _____________________________________________________ Service information for the specialized dealer: The TV set may be operated only using the mains cable set supplied. It prevents mains interference and is an integral part of the appliance approval. For replacement purposes, please order only the mains cable set with the designation “GWN 9.22/part number 8290.991-316” from an approved after-sales service.
CUSTOMER INFORMATION _____________________________________________________ Contact assignment for the EURO-AV socket 21 19 2 1 pin 11 12 13 14 15 16 17 18 19 10 11 12 13 14 15 16 17 18 19 20 21 = = = = = = = = = = = = = = = = = = = = = signal audio output right audio input right audio output left audio ground blue ground audio input left RGB blue input switching voltage green ground data line (MEGALOGIC) RGB green input – red ground ground RGB red input (S Video = Chroma) RGB switching voltage video g
CORRECTING PROBLEMS YOURSELF ____________ If the remedies below do not lead to a good result, contact an authorised GRUNDIG dealer. Please consider that problems can also be caused by external appliances, such as video recorders and satellite receivers.
CORRECTING PROBLEMS YOURSELF ____________________________________ Problem Possible cause Remedy colors wrong, color spots strong magnetic field from speakers (or other) increase distance of speaker to TV set problem with terrestrial magnetic field change appliance position volume at minimum or speakers switched off increase/switch on volume volume regulation activated via audio cinch socket (if this possibility is available) select sound output via speaker problem is with the broadcaster test a
