Users Guide Manual

QuikRuler III 13
2. Click on the button repeatedly or click on the or button to
display the option you want to change. The Configure options include:
 Digits Rt of ‘.’
 Select Tones
 Select Language
 Decimal Pnt Char
 Last Character
3. Click on the or button to change the current setting of the displayed
option. See the following sections for details on each option.
Setting Fractional Digits (Digits to the right of the period [.]]
QuikRuler III can display from 0 to 8 digits to the right of the decimal point. Use this
Configure option to set the number of digits to the right of the decimal point.
1. Display the Digits Rt of ‘.’ Option on line 1.
The current setting for the number of digits is displayed on line 2 beneath the
flashing cursor.
2. Change the current setting by clicking on a number from to on the
QuikRuler Menu.
3. Click on the button to save your setting, or choose another configuration
option or QuikRuler function to save your setting or activate the selected function.
Setting Tone Options
QuikRuler III can sound a tone when you make a selection from the QuikRuler Menu, or
when you press the stylus tip on the digitizer surface, or both. You can opt to turn off the
tones entirely.
1. Display the Select Tones option on line 1.
The currently selected tone option is displayed on line 2.