Users Guide Manual

QuikRuler III 27
You can use the calculator to transform your measurements in various ways. For example,
suppose you are using a drawing to estimate the amount of carpeting that will be required
for an entire floor of an office building. You want to add 5 percent to the measurement, to
account for waste, mistakes and so on. You would follow these steps:
1. Measure the area where carpeting is required.
2. Click on the buttons.
3. Select the button to display the total.
You can also use the QuikRuler Menu numeric keypad as a traditional calculator to add,
subtract, multiply and divide numbers independently of your measurements. You can do
this at any time, even while you are using QuikRuler III functions.
Editing Data on the Display
QuikRuler III provides several ways of editing and correcting the data on the display.
Correcting Mistakes When Accumulating Measurements
When you are accumulating measurements for areas and lengths, use the
function to clear the current measurement. In addition, you can use this function to
correct mistakes made while accumulating measurements.
Follow the steps below when you need to fix a mistake that occurred while you were
adding the measurements of several areas. You can use the same procedure to fix
mistakes made while accumulating measurements for lengths.
1. Click on the button to clear the area you are currently measuring from
the QuikRuler III display.
2. Select the button.
QuikRuler III displays the size of the area you have already calculated.