User's Manual

MAINTENANCE & REPAIR

Working on the Heli-Max

™

Novus CP will require small tools. The DTXR0170

DuraTrax

Precision Phillips Screwdriver 00x75mm is recommended for the

Novus CP.

Although the Novus CP is a sturdy helicopter, on occasion it will be necessary

to replace damaged parts after a crash. Please use this section as a guide to

performing these steps.

NOVUS CP – MAIN ROTOR BLADE REPLACEMENT

Remove the blade bolt

using a #00 phillips

screwdriver. After the blade

bolt has been removed,

slide the rotor blade out

of the blade grip. Reinstall

the new blade, ensuring

that the holes within the

blade and blade grip are

aligned properly. Reinstall

the blade bolt.

NOVUS CP – MAIN ROTOR GRIP REPLACEMENT

Remove both blade bolts

and main rotor blades.

Remove the linkages from

both blade grip mixers.

Remove the two spindle

screws and the blade grips

can be easily removed.

Reinstall the parts in the

reverse order listed above.