Manualshelf

Specification Sheet

ManualsBrandsGuardian Equipment ManualsEmergency Eyewash StationsEyeSafe Faucet Mount Steel Eyewash Station, Assembled
12
Faucet-Mounted Units
Guardian Equipment
1140 N North Branch St
Chicago, IL 60642
312 447 8100 telephone
312 447 8101 facsimile
gesafety.com
ETL Listed 101496.
Units have been tested
to and comply with
ANSI Z358.1-2014.
Listed 8116. Units have been
tested to and comply with
ANSI Z358.1-2014 and the
Uniform Plumbing Code.
G1100 EyeSafe™ Faucet-Mounted Eyewash, Adjustable Aerated Outlet Heads
Application: EyeSafe™ faucet-mounted eyewashes convert
any faucet into an emergency eyewash station without
interfering with normal faucet operation. An EyeSafe™ unit
can be installed at any sink, close to where accidents might
occur. In an emergency, unit is quickly located and activated,
and provides an unlimited supply of potable water for rinsing
the user’s eyes.
Outlet Heads: Outlet heads are mounted 3" apart and deliver
a soft, aerated flow of water. Heads angle forward toward
user. Angle of heads is adjustable to permit full coverage and
avoid splashing. Furnished with float-off dust covers to protect
outlet heads.
Valve: Forged brass diverter valve. Pull knob to activate
eyewash; water pressure holds eyewash in operation, leaving
user’s hands free. Push knob or turn off faucet to return to
normal faucet operation.
Inlet: Body has 55/64"-27 female thread. Furnished with
three adaptors (15/16"-27, 13/16"-27 and 3/8" IPS) for installing
on most commonly used faucets, including laboratory-type
faucets.
Outlet: Furnished with removable aerator on bottom.
Quality Assurance: Each unit is completely assembled and
water tested prior to shipment.
important: Faucet-mounted eyewashes, whether
manufactured by Guardian Equipment or other companies,
require two motions to operate (turn on water, pull knob
to activate eyewash flow). Therefore, Guardian Equipment
does not believe that these units meet the provisions of ANSI
Z358.1-2014 as eyewash units. These units are intended solely
as supplemental units in addition to dedicated, plumbed
eyewash equipment installed in the workplace.
Faucet-mounted eyewashes should be used with cold or
warm water only. Use of hot water might cause scalding.
Available Options
AP400-012 Inlet adaptor with 13/16"-24 female thread.
250-046R Replacement float-off dust covers
(package of 2).

Summary of content (2 pages)