Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
115
:TRIGger:EXTERnal:PRObe:TYPe ..............................130
:TRIGger:EXTERnal:PRObe:RATio.............................130
:TRIGger:BUS:TYPe ...................................................130
:TRIGger:BUS:B1:I2C:CONDition .............................131
:TRIGger:BUS:B1:I2C:ADDRess:MODe ....................132
:TRIGger:BUS:B1:I2C:ADDRess:TYPe .......................132
:TRIGger:BUS:B1:I2C:ADDRess:VALue ....................133
:TRIGger:BUS:B1:I2C:ADDRess:DIRection ...............133
:TRIGger:BUS:B1:I2C:DATa:SIZe ..............................134
:TRIGger:BUS:B1:I2C:DATa:VALue ...........................134
:TRIGger:BUS:B1:UART:CONDition .........................135
:TRIGger:BUS:B1:UART:RX:DATa:SIZe ....................136
:TRIGger:BUS:B1:UART:RX:DATa:VALue .................136
:TRIGger:BUS:B1:UART:TX:DATa:SIZe .....................137
:TRIGger:BUS:B1:UART:TX:DATa:VALue .................137
:TRIGger:BUS:B1:SPI:CONDition .............................138
:TRIGger:BUS:B1:SPI:DATa:SIZe ..............................139
:TRIGger:BUS:B1:SPI:DATa:MISO:VALue ................139
:TRIGger:BUS:B1:SPI:DATa:MOSI:VALue ................140
:TRIGger:BUS:B1:PARallel:VALue .............................141
:TRIGger:LOGic:INPut:CLOCK:SOURce ...................141
:TRIGger:LOGic:PATtern ...........................................142
:TRIGger:LOGic:PATtern:INPut:D<X> ......................142
:TRIGger:LOGic:PATtern:DELTatime ........................143
:TRIGger:LOGic:PATtern:WHEn ...............................143
:TRIGger:TIMEOut:WHEn .........................................144
:TRIGger:TIMEOut:TIMER ........................................145
:TRIGger:FREQuency
Query
Description
Queries the trigger frequency.
Syntax
:TRIGger:FREQuency{?}
Return parameter
<NR3>
Returns the trigger frequency.