Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
116
Example
:TRIGger:FREQuency?
1.032E+3
Returns the trigger frequency.
:TRIGger:TYPe
Set
Query
Description
Sets or queries the trigger type.
Syntax
:TRIGger:TYPe {EDGe | DELay | PULSEWidth | VIDeo |
RUNT | RISEFall |LOGic | BUS | TIMEOut | ? }
Parameter
EDGE
Edge trigger
DELay
Delay trigger
PULSEWidth
Pulse width trigger
VIDeo
Video trigger
RUNT
Runt trigger
RISEFall
Rise and fall trigger
LOGic
Logic trigger
BUS
Bus trigger
TIMEOut
Timeout trigger
Return parameter
Returns the trigger type.
Example
:TRIGger:TYPe EDGE
Sets the trigger type to edge.
:TRIGger:SOURce
Set
Query
Description
Sets or queries the trigger source.
Syntax
:TRIGger:SOURce
{ CH1 | CH2 | CH3 | CH4 | EXT | LINe | D0 | D1 | D2 |
D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 |
D13 | D14 | D15 | ? }
Parameter
CH1 to CH4
Channel 1 to channel 4
EXT
External source