Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
163
Example
:BUS1:SPI:SS:SOURce D0
Sets channel D0 as the SPI SS source.
:BUS1:SPI:MOSI:SOURce
Set
Query
Description
Sets or queries which channel is used for the SPI
MOSI source.
Syntax
:BUS1:SPI:MOSI:SOURce { OFF | D0 | D1 | D2 | D3 |
D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 |
D14 | D15 | ? }
Parameter/Return
parameter
D0 to D15
Digital channels D0 to D15
OFF
No MOSI source.
Example
:BUS1:SPI:MOSI:SOURce D2
Sets channel D2 as the SPI MOSI source.
:BUS1:SPI:MISO:SOURce
Set
Query
Description
Sets or queries which channel is used for the SPI
MISO source.
Syntax
:BUS1:SPI:MISO:SOURce { OFF | D0 | D1 | D2 | D3 |
D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 |
D14 | D15 | ? }
Parameter/Return
parameter
D0 to D15
Digital channels D0 to D15
OFF
No MISO source.
Example
:BUS1:SPI:MISO:SOURce D3
Sets channel D3 as the SPI MISO source.
:BUS1:PARallel:BIT<X>:SOURce
Set
Query
Description
Sets or queries which channels are assigned to
what bits for the parallel bus.