Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
169
:SEARCH:TRIGger:BUS:B1:UART:RX:DATa:SIZe .....186
:SEARCH:TRIGger:BUS:B1:UART:RX:DATa:VALue ..187
:SEARCH:TRIGger:BUS:B1:UART:TX:DATa:SIZe .....187
:SEARCH:TRIGger:BUS:B1:UART:TX:DATa:VALue ..188
:SEARCH:TRIGger:BUS:B1:SPI:CONDition ..............189
:SEARCH:TRIGger:BUS:B1:SPI:DATa:SIZe ...............189
:SEARCH:TRIGger:BUS:B1:SPI:DATa:MISO:VALue .190
:SEARCH:TRIGger:BUS:B1:SPI:DATa:MOSI:VALue .191
:SEARCH:TRIGger:BUS:B1:PARallel:VALue ..............191
:SEARCH:COPY
Set
Description
Copies the search settings to the trigger settings or
copies the trigger settings to the search settings.
Syntax
:SEARCH:COPY {SEARCHtotrigger|TRIGgertosearch}
Parameter
SEARCHtotrigger
Copy the search setting to
the trigger settings.
TRIGgertosearch
Copy the trigger settings
to the search settings.
Example
:SEARCH:COPY SEARCHtotrigger
Copies the search settings to the trigger settings.
:SEARCH:STATE
Set
Query
Description
Sets or queries whether the Search function is on or
off.
Syntax
:SEARCH:STATE { OFF | ON | ? }
Parameter/Return
parameter
OFF
Turn the Search function on.
ON
Turn the Search function off.
Example
:SEARCH:STATE ON
Turn Search on.