Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
170
:SEARCH:TOTAL
Query
Description
Returns the total number of events found from the
search function.
Syntax
:SEARCH:TOTAL?
Parameter
<NR1>
Number of events.
Example
:SEARCH:TOTAL?
5
:SEARCH:TRIGger:TYPe
Set
Query
Description
Sets or queries the search trigger type.
Syntax
:SEARCH:TRIGger:TYPe { EDGe | PULSEWidth |
RUNT | RISEFall | LOGic | BUS | ? }
Parameter/Return
parameter
EDGe
Edge trigger
PULSEWidth
Pulse width trigger
RUNT
Runt trigger
RISEFall
Rise and Fall trigger
LOGic
Logic trigger
BUS
Bus trigger
Example
:SEARCH:TRIGger:TYPe EDGE
Sets the search trigger to the edge type.
:SEARCH:TRIGger:SOURce
Set
Query
Description
Sets or queries the search trigger source.
Syntax
:SEARCH:TRIGger:SOURce {CH1 | CH2 | CH3 | CH4 |
D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 |
D11 | D12 | D13 | D14 | D15 | ? }
Parameter/Return
parameter
CH1 to CH4
Channel 1 to Channel 4
D0 to D15
Digital channels D0 to D15