Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
174
Parameter
POSitive
Positive polarity
NEGative
Negative polarity
EITher
Positive or negative polarity
Return parameter
Returns the pulse runt search trigger polarity.
Example
:SEARCH:TRIGger:RUNT:POLarity POSitive
Sets the Pulse Runt search trigger polarity to
positive.
:SEARCH:TRIGger:RISEFall:SLOP
Set
Query
Description
Sets or queries the slope of the Rise and Fall search
trigger.
Syntax
:SEARCH:TRIGger:RISEFall:SLOP { RISe | FALL |
EITher | ? }
Related
commands
:SEARCH:TRIGger:TYPe
Parameter
RISe
Rising slope
FALL
Falling slope
EITher
Either rising or falling slope
Return parameter
Returns the rise & fall slope.
Example
:SEARCH:TRIGger:RISEFall :SLOP RISe
Sets the Rise & Fall search trigger slope to rising.
:SEARCH:TRIGger:PULSe:WHEn
Set
Query
Description
Sets or queries the pulse width search trigger
conditions.
Syntax
:SEARCH:TRIGger:PULSe:WHEn {THAN | LESSthan |
EQual | UNEQual | ?}
Related
commands
:SEARCH:TRIGger:TYPe
:SEARCH:TRIGger:PULSe:TIMe