Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
191
:SEARCH:TRIGger:BUS:B1:SPI:DATa:MOSI:
VALue
Set
Query
Description
Sets or queries the search triggering data value for
the SPI bus when the bus is set to trigger on MOSI
or MISO/MOSI.
Syntax
:SEARCH:TRIGger:BUS:B1:SPI:DATa:MOSI:VALue
{string | ? }
Related
commands
:SEARCH:TRIGger:BUS:B1:SPI:DATa:SIZe
Parameter
<sting>
The number of characters in the string
depends on the data size setting. The
string must be enclosed in double
quotes, "string".
x = don’t care
1 = binary 1
0 = binary 0
Return Parameter
Returns the data value.
Example1
:SEARCH:TRIGger:BUS:B1:SPI:CONDition MOSI
:SEARCH:TRIGger:BUS:B1:SPI:DATa:SIZe 2
:SEARCH:TRIGger:BUS:B1:SPI:DATa:MOSI:VALue
"1x1x0101"
Sets the value to 1x1x0101
Example2
:SEARCH:TRIGger:BUS:B1:SPI:DATa:MOSI:VALue?
1X1X0101
:SEARCH:TRIGger:BUS:B1:PARallel:VALue
Set
Query
Description
Sets or queries the search triggering data value for
the Parallel bus.
Syntax
:SEARCH:TRIGger:BUS:B1:PARallel:VALue {string | ? }