Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
203
Related
commands
:BUS1:LABel
Parameter
OFF
Turns the file label off for the bus.
ON
Turns the file label on for the bus.
Return parameter
Returns the status of the file label for the bus (ON,
OFF).
Example
:BUS1:LABel "Bus"
:BUS1:LABel:DISPlay ON
:BUS1:LABel:DISPlay?
ON
Sets the label for the bus to "Bus" and then turns
the label display on. The query return shows that
the label is on.
:D<X>:LABel
Set
Query
Description
Sets or returns the waveform label for the selected
digital channel.
Syntax
:D<X>:LABel {<string> | ?}
Related
commands
:D<X>:LABel:DISPlay
Parameter
<X>
Digital Channel D(0 to 15)
<string>
The string must be no more than 8
characters and only contain
alphanumeric characters in addition
to period, dash and underscore
characters. The string must be
enclosed in double quotes, “string”.
Return parameter
<string>
Returns the label for the selected
digital channel. No return indicates
that there has not been a file label
assigned for the selected digital
channel.