Manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
204
Example1
:D0:LABel "D0_lab"
Sets the D0 label as "D0_lab".
Example2
:D0:LABel?
D0_lab
:D<X>:LABel:DISPlay
Set
Query
Description
Turns the label on/off for the selected digital
channel or returns its status.
Syntax
:D<X>:LABel:DISPlay { OFF | ON | ? }
Related
commands
:D<X>:LABel
Parameter
<X>
Digital channel D(0 to 15)
OFF
Turns the file label off for the selected
digital channel.
ON
Turns the file label on for the selected
digital channel.
Return parameter
Returns the status of the label for the selected
digital channel (ON, OFF).
Example
:D1:LABel "D1"
:D1:LABel:DISPlay ON
:D1:LABel:DISPlay?
ON
Sets the D1 label to "D1" and then turns the label
display on. The query return shows that the label
is on.
:DIGital:ANAlog:A<X>:LABel
Set
Query
Description
Sets or returns the waveform label for the selected
analog waveform (from Logic Analyzer function).
Syntax
:DIGital:ANAlog:A<X>:LABel {<string> | ?}