Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- Overview
- The PEL-3000 Series is a family of high performance DC electronic loads positioned to test a wide range of different power sources. The DC electronic loads are fully programmable to simulate anything from basic static loads to complex dynamic loads. W...
- Model Line Up
- Main Features
- Package Contents and Accessories
- Front Panel
- Rear Panel
- Display Overview
- First Time Use Instructions
- SPECIFICATIONS
Setting the Date and Time
The date and time settings are used to time-stamp files
when saving files.
1. Press
Shift
+
Utility
Help
> Time Set[F4] to set
the date and time.
Settings: Month, Day, Year, Hour, Minute
Updating the Firmware
The PEL-3000 allows the firmware to be updated by
end-users. Before using the PEL-3000, please check the
GW Instek website or ask your local distributor for the
latest firmware. Before updating the firmware, please
check the firmware version.
View Firmware Version
1. Press
Shift
+
Utility
Help
.
2. Select System/Info[F1].
3. The system information is listed in the display.
MainFrame Ver: Mainframe firmware
version.
FPGA Ver: FPGA firmware version
PEL-3XXX SN: Serial number of the unit.
SCPI Ver: SCPI-compatible version.