Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- Overview
- The PEL-3000 Series is a family of high performance DC electronic loads positioned to test a wide range of different power sources. The DC electronic loads are fully programmable to simulate anything from basic static loads to complex dynamic loads. W...
- Model Line Up
- Main Features
- Package Contents and Accessories
- Front Panel
- Rear Panel
- Display Overview
- First Time Use Instructions
- SPECIFICATIONS
Firmware update
1. Press
Shift
+
File
FUNC
.
2. Select USB with the Media [F1] soft-key.
3. Press the File Utility [F5] soft-key.
4. Select the *.UPG upgrade file and press Select[F1]
twice. Once to select the file and once to confirm.
5. Wait for the update to complete and reset the
power.
Warning
Do not turn the load generator off or
remove the USB memory when the
firmware is being read or upgraded.
Conventions
The following conventions are used throughout the
user manual. Read the conventions below for a basic
grasp of how to operate the PEL-3000 menu system
using the front panel keys.
Soft-menu keys
The F1 to F5 function keys at the bottom of the
display correspond directly to the soft-menu keys
on top.
I MON OUT TRIG OUT
1.5 - 150V
175W
0 - 35A
P0
P1
P4
P7
CAL.
P2
P5
P8
Lock
P3
P6
P9
Utility
Local
File
0
1
4
7
2
5
8
3
6
9
EnterClear
Shift
Preset
Load
On/
Off
Main
Help
FUNC
Short
F1 ~ F5
function keys
Soft-menu
keys
Mode
CV
I Range
H 35A
V Range
L 15V
Function
Static
Configure
0.000
V
0.000
A
0.00
w
SlewRate 2500.00
CC B Value 0.000
CC A Value 0.000
LOADRS232
A Value
Fine
03/Sep/2012
mA/us
A
A