Datasheet

GPM-001 Test Fixture
GPM-001(EU) Test Fixture
GTL-210 Test Lead
GTL-213 Test Lead
PANEL INTRODUCTION
1. Hardcopy key & USB Host
2. 5” TFT LCD
3. Operation & Navigator Key
4. Current Input Terminal
5. External Current Sensor Input Terminal
(EXT1/EXT2)
6. Voltage Input Terminal
7. Standard Interfaces : RS-232C, LAN,
USB Device
8. Standard Interface : GPIB
9. Optional Interface : DA4
9
8
7
6
5
4
3
USB USB
Host Device
LAN
2
1
4 5 6
8
9
7
2 3
GPM-8310 provides comprehensive and diverse communications
interfaces including RS-232 / USB / LAN / GPIB, which are suitable for
customers to write computer software for remote control and the
collection of measurement results through commands. The optional
Digital I/O (DA4) interface provides 3 different modes: the external control
mode, the DA4 output mode and the self-defined output mode based on
user settings. When the setting is in the external control mode, it allows
users to activate, stop, trigger or reset the integration measurement
function through external signals. When the setting is in the DA4 output
mode, users can define 4 measurement parameter values from the 25
measurement parameters provided (even with the result of integration
measurement) to produce outputs by a fixed level (full scale +5V) or a
manual level (full scale ±5V) and receive results by collocating with a data
recorder. When the setting is in the self-defined output mode, a
communications interface is required to control the action of each defined
pin through commands.
Practical Interface DA4 Interface Mechanism
E.
CONVENIENT AND PRACTICAL INTERFACE
DA4