Manual

OPERATION
19
Common Utility Settings
Description
The Common Utility menu is accessed by
pressing the UTILITY key when the tester is in
READY status. This utility controls the LCD
and control settings. These settings are system
wide.
The Common Utility settings include:
LCD: LCD Contrast, LCD Brightness
CTRL: Start Ctrl (FRONT PANEL, SIGNAL
I/O, REMOTE CONNECT), Double
Action, Key Lock, Interlock
C O M M O N U T LI T YI
L C D B r i g h t n e s : B Rs I
L C D C o n t r a s t : 7
= 0 0R
MT I E = 0 0RG H T
MT I E = 0 0R
L C D C T R L MT I E = 0 0R
Utility selection
Select a Utility Setting.
 Choose a utility by pressing the LCD or CTRL soft-
key under the LCD bezel.
 The chosen utility will be displayed.
 Use the FIELD key to highlight a setting.
 Use the scroll wheel to choose or edit a parameter for
the setting.
L C D
C T R L
FIELD
NOTE
The INTERLOCK function is set to OFF by default
in the Common Utility>CTRL menu. To increase
safety, set INTERLOCK to ON and use the
accompanying Interlock key to enable testing.
Save the Common Utility Setting
 To save any changes, press the SAVE key.
SAVE