Instructions

ASR-2000 Series User Manual
170
2. Press the Menu key. The Menu
setting will appear on the display.
3. Use the scroll wheel to go to item 4, USB Device.
4. If the connection is successful Connection Status
will change from Offline to Online.
Exit
5. Press Exit[F4] to exit from the rear
panel USB settings.
USB Remote Control Function Check
Functionality
Check
Invoke a terminal application such as Realterm.
ASR-2000 will appear as a COM port on the PC.
To check the COM settings in Windows, see the
Device Manager. For example, in Win7 go to the
Control panel → System → Hardware tab.
Note
If you are not familiar with using a terminal
application to send/receive remote commands via a
USB connection, please see page 174 for more
information.
Run this query command via the terminal after the
instrument has been configured for
USB remote control (page 169).
*IDN?
This should return the Manufacturer, Model
number, Serial number, and Software version in the
following format.
GWINSTEK, ASR-2XXX, GXXXXXXXX,
XX.XX.20XXXXXX
Manufacturer: GWINSTEK