Instructions

ManualsBrandsGW Instek ManualsBench power supply unitsGW Instek ASR-2050 Euro Bench PSU (adjustable voltage) 0.1 - 500 V 10 mA - 5 A 500 W No. of outputs 1 x

COMMUNICATION INTERFACE

173

RS232 Remote Control Function Check

Functionality

Check

Invoke a terminal application such as Realterm.

For RS-232, set the COM port, baud rate, stop bit,

data bit and parity accordingly.

To check the COM settings in Windows, see the

Device Manager. For example, in Win7 go to the

Control panel → System → Hardware tab.

Note

If you are not familiar with using a terminal

application to send/receive remote commands from

the serial port, please see page 174 for more

information.

Run this query command via the terminal after the

instrument has been configured for

RS-232 remote control (page 171).

*IDN?

This should return the Manufacturer, Model

number, Serial number, and Software version in the

following format.

GWINSTEK, ASR-2XXX, GXXXXXXXX,

XX.XX.20XXXXXX

Manufacturer: GWINSTEK

Model number : ASR-2XXX

Serial number : GXXXXXXXX

Software version : XX.XX.20XXXXXX

Note

For further details, please see the programming

manual, available on the GW Instek web site @

www.gwinstek.com.