Instructions

OPERATION
63
Sync
The signal source is from
internal. The output frequency is
synchronized with the external
TTL input signal or the power
line. This frequency setting can't
be set through the control panel
or the remote control. All of
setting conditions except for
output frequency are as same as
INT mode.
3. Press Enter to confirm the mode selection.
Example
Mode
menu
Select the Voltage Range
Background
The Range setting determines the general outlet
voltage range. The ranges available correspond to
common mains output voltage standards.
Steps
1. Press Range to access the Range
menu.
2. Set the voltage range with the F1 ~ F4 soft-keys.
Soft-keys
F1: AUTO
F3: 200V
F4: 100V
3. Press Enter to confirm the Range setting.