Instructions

ASR-2000 Series User Manual

Remote Sense

Operation

Remote sense is used to compensate for the voltage

drop seen across load cables due to resistance

inherent in the load cables. The remote sense

function can compensate a maximum of 5% of the

output voltage and all of output frequency.

1. Configure the remote sense setting to ON (page

127).

2. Connect the Neutral terminal of the remote

sense terminal block to the Neutral terminal of

the load.

3. Connect the Live terminal of the remote sense

terminal block to the Live terminal of the load.

Connection

Example

OUTPUT

terminal

block

Load

cables

Sensing

points

Sensing

cables

N.C. terminals are Not

available in the case.

Load



Note

Do Not connect any wires to the N.C terminals of the

remote sense terminal block.