User Manual User guide

APS-1102 LabVIEW Driver Manual
2-16
When a measurement error occurs, “True” is set.
GW APS-1102 MEAS Ac Pfac.vi
This returns the output’s power factor.
The power factor is calculated as “active power/apparent power”.
<Output>
Pfactor
This outputs the output power factor.
Error
When a measurement error occurs, “True” is set.
GW APS-1102 MEAS Ac Reac.vi
This returns the reactive power in Var units.
<Output>
Reactive
This outputs the reactive power in Var units.
Error
When a measurement error occurs, “True” is set.
GW APS-1102 MEAS Ac.vi
This returns the active power in W units.
<Output>
AC
This outputs the active power in W units.
Error
When a measurement error occurs, “True” is set.
GW APS-1102 MEAS Volt.vi
This returns the output voltage RMS value (AC+DC’s RMS value) in Vrms units.
<Output>
Voltage: AC+DC
This outputs the output voltage RMS value (AC+DC’s RMS value) in Vrms units.
Error
When a measurement error occurs, “True” is set.