User Manual User guide

2.10 OUTPut Subsystem
2-23
2.11 INPut Subsystem
GW APS-1102 INPUT.vi
This sets the external input gain used external mode (AC-EXT or AC+DC-EXT) and internal +
external mode (AC-ADD or AC+DC-ADD).
When in AC-EXT, AC-ADD, AC+DC-EXT or AC+DC-ADD mode, the output waveform setting
cannot be made ([3, “Invalid in this mode] error occurs)
<Input>
Gain_Rn100V
This sets the external input gain in the 100 V range. The default setting is “0.0”.
Gain _Rn200V
This sets the external input gain in the 200 V range. The default setting is “0.0”.
Rn_set
This specifies the range to be set. The default setting is “100V (False)”.
<Output>
Gain
When Read = True, outputs the external input gain set for the APS-1102. When Read =
False, “999.9” is set.