User Manual User guide

APS-1102 LabVIEW Driver Manual
2-26
<Input>
Pon
This sets the output status at power-on. The default setting is “OFF”.
<Output>
Query Pon
When Read = True, outputs the output status at power-on set for the APS-1102. When Read
= False, “9” is set.
GW APS-1102 SYST Tun.vi
This sets the unit for sequence step execution time unit as s or ms.
<Input>
Tunit
This sets the unit for sequence step execution time. The default setting is “[s]”.
<Output>
Query Tunit
When Read = True, outputs the unit for sequence step execution time set for the APS-1102.
When Read = False, “9” is set.
GW APS-1102 SYST Wrel.vi
This clears a warming.
When a warming is cleared, the SET screen is displayed and ask key input is enable.
In order for the warning to be cleared, it is necessary that all the factors of the warning have been
removed and it is ready to be cleared.
(If no warning has occurred, or if a warning has occurred but the device is not ready to cancel the
warning, [-200, “Execution error”] error occurs.)