User Manual

ASR-2000 Series User Manual
118
Ipkh CLR
The peak current measured during output process can be easily
cleared out via this function. It is applicable for user to restart
measuring the peak current value when necessity emerges.
Steps
1. Press the Menu key. The Menu
setting will appear on the display.
2. Use the scroll wheel to go to item 2, MISC
Configuration and press Enter.
3. Go to the Ipkh CLR setting using the scroll
wheel and press Enter on the EXEC button.
The measured hold peak current value will be
zeroed immediately.
Ipkh CLR
EXEC
Exit
4. Press Exit[F4] to exit from the
MISC Configuration settings.
Example
Current peak hold
value clear
Note
Although the hold peak current will be zeroing at
once right after the execution of Ipkh CLR action,
the zeroing value, however, will be soon updated
when new measurement greater than 0 occurs
during output process.