User Manual

ASR-2000 Series User Manual
18
V
Used for setting the output voltage
V-Limit
+
Used for setting the output voltage limit
value
F
Used for setting the output frequency
(DC mode N/A)
F-Limit
+
Used for setting the output frequency
limit value (DC mode N/A)
Irms
Used for setting the maximum output
current
IPK-Limit
+
Used to set the peak output current limit
value
Range Key
Switches between the 100V, 200V and
AUTO ranges
Output
Mode
+
Selects between the AC+DC-INT, AC-INT,
DC-INT, AC+DC-EXT, AC-EXT, AC+DC-
ADD, AC-ADD, AC+DC-Sync and AC-Sync
modes
Menu Key
Enters the Main menu or goes back to
one of the display modes.
On Phase
+
Sets the on phase for the output voltage
Test Key
Puts the instrument into the Sequence
and Simulation control mode.
Output
Waveform
+
Selects between the Sine, Square,
Triangle and ARB 1~16 waveforms
(not available for DC-INT, AC+DC-EXT
and AC-EXT)