User Manual

ManualsBrandsGW Instek ManualsAC Power SourcesAC/DC Power Source, 1kVA, Programmable

OPERATION

39

WARNING

Except for the AC-INT, AC-EXT and AC-Sync

modes, the terminal outputs DC voltage as well.

3. Turn the power on. The AC power supply is

now ready to power the DUT.

Rear Panel Output

Connection

The rear panel output is used to supply higher

power DUTs.

1. Disconnect the unit from the mains power

socket and turn the power switch off.

2. Remove the protective lid from the output

terminals by loosening the screw.

3. Connect the output AC power wires to the AC

output terminals.

 Red  Line (L)

 Black  Neutral (N)

 Green  GND ( )

L

ine

Neutral

Grou

nd