User Manual

ASR-2000 Series User Manual
96
Turning the Output On/Off
When the output is turned on, the DUT can be connected to either
the rear panel output or the front panel output.
WARNING
Both of these outputs are electrically linked. Only one
DUT should be connected to any one of the outputs at
a time. Using both outputs at the same time is not
supported. Using the front and rear outputs at the
same time could cause dangerous operating
conditions. See page 38 for details about using the
output terminals or sockets.
Turn Output On
Press the Output key. The Output
key will light up in orange and ON
will be displayed in the status bar
to indicate that the output is on.
Turn Output Off
Press the Output key. The Output
key light will go out and OFF will
be displayed in the status bar to
indicate that the output is off.