Manual

GBS-1000 Programming Manual
36
Display Command
:DISPlay:ACCumulate .................................................. 36
:DISPlay:CONTrast ...................................................... 37
:DISPlay:GRATicule ..................................................... 37
:DISPlay:WAVEform .................................................... 38
:REFResh ...................................................................... 38
:DISPlay:ACCumulate
Set
Query
Description
Turns On/Off the display accumulate mode or returns
the status.
Same as: Display key → F2 (Accumulate)
Syntax
< Long >
< Short >
:display:accumulate<NR1>
:display:accumulate?
:disp:acc<NR1>
:disp:acc?
Parameter
<NR1>
Display accumulation mode
0
Accumulation Off
1
Accumulation On
Example
:display:accumulate 1
Turn On accumulation