Manual

COMMAND SET
39
Go-NoGo Command
:GONogo:FUNction ................................................... 39
:GONogo:CLEar .......................................................... 40
:GONogo:EXECute ..................................................... 40
:GONogo:NGCount? ...................................................41
:GONogo:NGDefine ....................................................41
:GONogo:SOURce ...................................................... 42
:GONogo:VIOLation ................................................... 42
:TEMPlate:MAX ........................................................... 43
:TEMPlate:MIN ........................................................... 44
:TEMPlate:MODe ....................................................... 45
:TEMPlate:POSition:MAX ........................................... 46
:TEMPlate:POSition:MIN ........................................... 47
:TEMPlate:SAVe:AUTo ................................................ 48
:TEMPlate:SAVe:MAXimum ....................................... 48
:TEMPlate:SAVe:MINimum ....................................... 48
:TEMPlate:TOLerance ................................................. 49
Before running any Go-NoGo command, Go-NoGo has to
be activated by “:GONogo:FUNction 1” command.
:GONogo:FUNction
Set
Description
Turns the Go-NoGo function On/Off.
Syntax
< Long >
< Short >
:gonogo:function <NR1>
:gonogo:function?
:gon:fun <NR1>
:gon:fun?
Parameter
<NR1>
Activate/Deactivate Go-NoGo
0
Deactivate Go-NoGo
1
Activate Go-NoGo
Example
:gonogo:function 1
Turn Go-NoGo On