Manual

GBS-1000 Programming Manual
56
:MEASure:FFFDelay
Query
Returns the delay between the first falling edge of
source1 and the first falling edge of source2.
Same as: Measure key F1~F5 F3 (DelayFFF)
< Long >
< Short >
:measure:fffdelay?
:meas:fffd?
<NR3>
Select the two delay channels before entering this
command: :measure:delay1 <NR1>
and :measure:delay2 <NR1>. See pagexx.
:measure:delay1 1
:measure:delay2 2
:measure:fffdelay?
Select channel 1 and 2
as delay source1/2,
then measure the FFF.
:MEASure:FFRDelay
Query
Returns the delay between the first falling edge of
source1 and the first rising edge of source2.
Same as: Measure key F1~F5 F3 (DelayFFR)
< Long >
< Short >
:measure:ffrdelay?
:meas:ffrd?
<NR3>
Select the two delay channels before entering this
command: :measure:delay1 <NR1>
and :measure:delay2 <NR1>. See pagexx.
:measure:delay1 1
:measure:delay2 2
:measure:fffdelay?
Select channel 1 and 2
as delay source1/2, and
then measure FFF.