Manual

GBS-1000 Programming Manual
58
:MEASure:FREQuency?
Query
Returns the frequency value.
Same as: Measure key F1~F5 F3 (Frequency)
< Long >
< Short >
:measure:frequency?
:meas:freq?
<NR3>
Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
:measure:source 1
:measure:frequency?
Select channel 1, then
measure frequency.
:MEASure:FRFDelay
Query
Returns the delay between the first rising edge of
source1 and the first falling edge of source2.
Same as: Measure key F1~F5 F3 (DelayFRF)
< Long >
< Short >
:measure:frfdelay?
:meas:frfd?
<NR3>
Select the two delay channels before entering this
command: :measure:delay1 <NR1>
and :measure:delay2 <NR1>. See pagexx.
:measure:delay1 1
:measure:delay2 2
:measure:frfdelay?
Select channel 1 and 2
as delay source1/2, and
then measure FRF.