Manual
Table Of Contents
![](/manual/gw-instek/gbs-1000-series-programming-manual/manual-english/images/img-5.png)
GBS-1000 Programming Manual
6
Functionality
check
Run this query command via the terminal.
*idn?
This should return the Manufacturer, Model
number, Serial number, and Firmware version in
the following format.
GW, GBS-1064, 000000001, V1.00
PC Software
(USB only)
The PC software, FreeWave, can be used for
remote control. This mode is only available for the
USB interface.
1. Activate FreeWave. For
installation details, see page
the FreeWave user manual.