Manual

COMMAND SET
65
:MEASure:SOURce
Set
Query
Description
Selects the measurement channel.
Same as: Measure key → F1~F5 → F1, F2
Syntax
< Long >
< Short >
:measure:source <NR1>
:measure:source?
:meas:sour <NR1>
:meas:sour?
Parameter
<NR1>
1 ~ 4
Channel1 ~ 4
Example
:measure:source 1
:measure:rprshoot?
Select channel 1, then
measure rise preshoot.
:MEASure:VAMPlitude
Query
Description
Returns the voltage difference between positive and
negative peak.
Same as: Measure key → F1~F5 → F3 (Vamp)
Syntax
< Long >
< Short >
:measure:vamplitude?
:meas:vamp?
Returns
<NR3>
Before this
command
Select the measurement channel before this
command: :measure:source <NR1>. See pagexx.
Example
:measure:source 1
:measure:vamplitude?
Select channel 1, then
measure rise Voltage
amplitude.