User Manual

GCP Series User Manual

WARNING

• Do not allow the device to get wet, and do not take

measurements with wet hands. This may cause an

electric shock.

• To avoid electric shock when measuring live lines,

wear appropriate protective gear, such as insulated

rubber gloves, boots and a safety helmet.

CAUTION

• To avoid damage to the device, protect it from

physical shock when transporting and handling.

Be especially careful to avoid physical shock from

dropping.

• This device should be installed and operated

indoors only, between 0 and 40°C (32 to 104°F) and

80% RH or less.

• Do not store or use the device where it could be

exposed to direct sunlight, high temperature or

humidity, or condensation. Under such conditions,

the device may be damaged and insulation may

deteriorate so that it no longer meets

specifications.

• This device is not designed to be entirely

waterproof or dustproof. To avoid damage, do not

use it in a wet or dusty environment.