User Manual

OVERVIEW
31
Measurement Procedure (Power supply)
NOTE
• Make sure the sum of the current consumption of
the connected current probe(s) does not exceed the
rated output current of the GCP-425P (See Fig.1)
on page 25.
• When using the GCP-425P with Model GCP-530 or
GCP-1030 Current Probe, in general only one
current probe may be connected. However,
depending on the current level of the object under
test, two current probes may be connected
simultaneously.
• The current consumption of a current probe is
dependent upon the current level of the object
under test.