User Manual

GDS-1000A-U Series User Manual
118
Saving the panel settings
Procedure
1. (For saving to USB flash
drive) Insert the USB flash
drive into the front panel
USB port.
2. Press the Save/Recall key
twice to access the Save
menu.
Save/Recal
l
Save/Recal
l
3. Press Save Setup.
4. Press Destination repeatedly
to select the saved location.
Use the Variable knob to
change the internal memory
location (S1 ~ S15).
VARIABL
E
Memory
Internal memory, S1 ~ S15
USB
USB, no practical limitation for the
amount of files. When saved, the
setup file will be placed in the root
directory.
5. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or the USB flash
drive is removed before completion.