User Manual

SAVE/RECALL
125
Recalling the default panel settings
Procedure
1. Press the Save/Recall key.
Save/Recal
l
2. Press Default Setup. The
factory installed setting will
be recalled.
Setting contents
The following is the default panel setting contents.
Acquisition
Mode: Normal
Channel
Coupling: DC Invert: Off
BW limit: Off voltage: x1
Cursor
Source: CH1 Horizontal: None
Vertical: None
Display
Type: Vectors Accumulate: Off
Graticule:
Horizontal
Scale: 2.5us/Div Mode: Main Timebase
H Pos Adj: Fine Hor Pos: 0
Math
Type: + (Add) Channel: CH1+CH2
Position: 0.00 Div Unit/Div: 2V
Measure
Item: Vpp, Vavg, Frequency, Duty cycle, Rise Time
Trigger
Type: Edge Source: Channel1
Mode: Auto Slope:
Coupling: DC Rejection: Off
Noise Rejection: Off
Utility
SaveImage, InkSaver On, Probe squarewave 1kHz
50% duty.