User Manual

QUICK REFERENCE
45
Default Settings
Here are the factory installed panel settings which
appear when pressing the Save/Recall key→
Default Setup.
Acquisition
Mode: Normal
Channel
Scale: 2V/Div Invert: Off
Coupling: DC Probe attenuation
voltage: x1
BW limit: Off Channel 1 & 2: On
Cursor
Source: CH1 Cursor: Off
Display
Type: Vectors Accumulate: Off
Grid: Full
Horizontal
Scale: 2.5us/Div Mode: Main Timebase
H Pos Adj: Fine Hor Pos: 0
Math
Type: + (Add) Position: 0.00 Div
Unit/Div: 2V
Measure
Item: Vpp, Vavg, Frequency, Duty Cycle, Rise
Time
Trigger
Type: Edge Source: Channel1
Mode: Auto Slope:
Coupling: DC Rejection: Off
Noise Rejection: Off
Utility
Hardcopy: SaveImage,
InkSaver On
ProbeComp: Square
wave, 1k, 50% duty cycle
Go-NoGo
Go-NoGo: Off Source: CH1
When:
Violating: Stop
(Continued)