User Manual

MEASUREMENT

Y1Y2

The difference between the upper and

lower cursor

V/A

The voltage/current difference (Y1-Y2).

Moving the

vertical cursors

To move the upper cursor,

press Y1 and then use the

Variable knob.

To move the lower cursor,

press Y2 and then use the

Variable knob.

To move both cursors at once,

press Y1Y2 and then use the

Variable knob.

Remove cursors

Press Cursor to remove the

onscreen cursors.

Cursor

Math Operations

The Math operations can add, subtract, multiply or perform

FFT/FFT RMS on the input waveforms. The resulted waveform can

be measured using the cursors, and saved or recalled just like

normal input signals.

Overview

Addition (+)

Adds the amplitude of CH1 & CH2 signals.

Subtraction (–)

Extracts the amplitude difference between CH1 &

CH2.

Multiplication (×)

Multiplies CH1 and CH2.

FFT

Performs a FFT calculation on a signal. Four types

of FFT windows are available: Hanning, Flattop,

Rectangular, and Blackman.