User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
121
:TRIGger:DELay:SLOP
Set
Query
Description
Sets or queries the trigger slope for the delay
trigger.
Syntax
:TRIGger:DELay:SLOP {RISe | FALL | EITher | ? }
Related
commands
:TRIGger:TYPe
Parameter
RISe
Rising slope
FALL
Falling slope
EITher
Either rising or falling slope
Return parameter
Returns the trigger slope.
Example
:TRIGger:DELay:SLOP FALL
Sets the trigger slope to falling.
:TRIGger:DELay:TYPe
Set
Query
Description
Sets or queries the trigger delay type.
Syntax
:TRIGger:DELay:TYPE {TIMe | EVENt | ?}
Related
commands
:TRIGger:TYPe
Parameter
TIMe
Sets the delay type to time.
EVENt
Sets the delay type to event.
Return parameter
Returns the trigger delay type.
Example
:TRIGger:DELay:TYPe TIMe
Sets the delay type to time delay.
:TRIGger:DELay:TIMe
Set
Query
Description
Sets or queries the delay time value.
Syntax
:TRIGger:DELay:TIMe {<NRf> | ?}