User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
157
:BUS1:I2C:ADDRess:RWINClude
Set
Query
Description
Sets or queries whether the read/write bit is
included in the I
2
C address.
Syntax
:BUS1:I2C:ADDRess:RWINClude { OFF | ON | ? }
Related
commands
:BUS1:STATE
Parameter
OFF
The R/W is not included.
ON
The R/W is included.
Return parameter
0
The R/W is not included.
1
The R/W is included.
Example
:BUS1:I2C:ADDRess:RWINClude ON
Includes the R/W bit in the I
2
C address.
:BUS1:I2C:SCLK:SOURce
Set
Query
Description
Sets or queries which channel is used for the I
2
C
SCLK source.
Syntax
:BUS1:I2C:SCLK:SOURce { D0 | D1 | D2 | D3 | D4 | D5
| D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15
| ? }
Parameter/Return
parameter
D0 to D15
Digital channels D0 to D15
Example
:BUS1:I2C:SCLK:SOURce D0
Sets channel D0 as the SCLK source.
:BUS1:I2C:SDA:SOURce
Set
Query
Description
Sets or queries which channel is used for the I
2
C
SDA source.