User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
159
Example
:BUS1:UART:BITRate 10
Sets the bit rate to 2400.
:BUS1:UART:PARIty
Set
Query
Description
Sets or queries the UART bus parity.
Syntax
:BUS1:UART:PARIty { <NR1> | ? }
Parameter/Return
parameter
<NR1>
0: None
1: Odd parity
2: Even parity
Example
:BUS1:UART:PARIty 1
Sets the parity to odd.
:BUS1:UART:PACKEt
Set
Query
Description
Sets or queries the UART packet setting.
Syntax
:BUS1:UART:PACKEt {<NR1> | ? }
Parameter/Return
parameter
<NR1>
0: Off
1: On
Example
:BUS1:UART:PACKEt 1
Turns UART packets on.
:BUS1:UART:EOFPAcket
Set
Query
Description
Sets or queries the EOF character for the UART
packet setting.
Syntax
:BUS1:UART:EOFPAcket <NR1>