User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
162
:BUS1:SPI:BITORder
Set
Query
Description
Sets or queries the bit order for the SPI bus.
Syntax
:BUS1:SPI:BITORder {<NR1> | ? }
Parameter/Return
parameter
<NR1>
0: MSB bit first
1: LSB bit first
Example
:BUS1:SPI:BITORder?
0
The bit order is currently set as MSB bit first.
:BUS1:SPI:SCLK:SOURce
Set
Query
Description
Sets or queries which channel is used for the SPI
SCLK source.
Syntax
:BUS1:SPI:SCLK:SOURce { D0 | D1 | D2 | D3 | D4 | D5
| D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15
| ? }
Parameter/Return
parameter
D0 to D15
Digital channels D0 to D15
Example
:BUS1:SPI:SCLK:SOURce D1
Sets channel D1 as the SPI SCLK source.
:BUS1:SPI:SS:SOURce
Set
Query
Description
Sets or queries which channel is used for the SPI SS
source.
Syntax
:BUS1:SPI:SS:SOURce { D0 | D1 | D2 | D3 | D4 | D5 |
D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 | D14 | D15
| ? }
Parameter/Return
parameter
D0 to D15
Digital channels D0 to D15