User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
173
Parameter
<NRf>
Low level value.
TTL
Sets the low trigger level to TTL.
ECL
Sets the low trigger level to ECL.
Return parameter
<NR3>
Returns the low level.
Example
:SEARCH:TRIGger:LLEVel TTL
Sets the low level search trigger to TTL.
Example
:SEARCH:TRIGger:LLEVel -3.30E-3
Sets the low level search trigger to 330mV/mA.
:SEARCH:TRIGger:PULSEWidth:POLarity
Set
Query
Description
Sets or queries the pulse width search trigger
polarity.
Syntax
:SEARCH:TRIGger:PULSEWidth:POLarity
{POSitive | NEGative | ?}
Related
commands
:SEARCH:TRIGger:TYPe
Parameter
POSitive
Positive polarity
NEGative
Negative polarity
Return parameter
Returns the pulse width polarity.
Example
:SEARCH:TRIGger:PULSEWidth:POLarity POSitive
Sets the pulse width polarity to positive.
:SEARCH:TRIGger:RUNT:POLarity
Set
Query
Description
Sets or queries the Pulse Runt search trigger
polarity.
Syntax
:SEARCH:TRIGger:RUNT:POLarity {POSitive |
NEGative | EITher | ?}
Related
commands
:SEARCH:TRIGger:TYPe