User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
COMMAND DETAILS
177
Example
:SEARCH:TRIGger:RISEFall:WHEn UNEQual
Sets the rise andfall search trigger condition to
unequal (≠).
:SEARCH:TRIGger:RISEFall:TIMe
Set
Query
Description
Sets or queries the rise and fall time.
Syntax
:SEARCH:TRIGger:RISEFall:TIMe {<NRf> | ? }
Related
commands
:SEARCH:TRIGger:TYPe
:SEARCH:TRIGger:RISEFall:WHEn
Parameter
<NRf>
Rise and Fall time (4nS to 10S)
Return Parameter
<NR3>
Returns the rise and fall time in
seconds.
Example
:SEARCH:TRIGger:RISEFall:TIMe 4.00E-5
Sets the trigger rise and fall time to 40.0us.
:SEARCH:TRIGger:LOGic:INPut:CLOCK:SO
URce
Set
Query
Description
Sets or queries which channel is used as the clock
source for the logic search trigger.
Note
When “NONe” is selected as the clock source, the
trigger will use the Pattern search trigger type.
Syntax
:SEARCH:TRIGger:LOGic:INPut:CLOCK:SOURce
{NONe | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D
9 | D10 | D11 | D12 | D13 | D14 | D15 | ? }
Related
commands
:SEARCH:TRIGger:LOGic:INPut:CLOCK:SOURce
:SEARCH:TRIGger:LOGic:INPut:CLOCK:EDGe
Parameter/Return
parameter
NONe
No clock source, Set to Pattern search
trigger.
D0 to D15
Digital channels D0 to D15