User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
198
:DIGital:LMEMory
Query
Description
Returns the data in acquisition memory for the digital
channels as a header + raw data.
Note
The data from this command is equivalent to the data
that is saved in the LM Detail format using the scope
panel controls.
Syntax
:DIGital:LMEMory?
Related
commands
ACQuire:RECOrdlength
:HEADer
Return parameter
Returns the raw data + header information for the
digital channels in the following format:
Format,2.0A,Display,0000000000001100,Memory
Length,1000000,IntpDistance,0,Trigger Address,-
544765,Threshold12_15,1.400E+00,Threshold8_11,1
.400E+00,Threshold4_7,1.400E+00,Threshold0_3,1.
400E+00,Vertical
Units,V,Label15,;Label14,;Label13,;Label12,;Label1
1,;Label10,;Label9,;Label8,;Label7,;Label6,;Label5,;
Label4,;Label3,;Label2,;Label1,;Label0,;Firmware,V
0.99.03,Horizontal Units,S,Horizontal Scale,5.000E-
04,Horizontal Position,0.000E+00,Horizontal
Mode,Main,SincET Mode,Real Time,Sampling
Period,5.000E-09,Time,25-Sep-12
16:52:08,Waveform Data;#72000000<Raw Data>
<LF>