User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Ethernet Commands
- Time Commands
- Bus Decode Commands
- Mark Commands
- Search Commands
- Digital Commands
- Label Commands
- Utility Commands
- APPENDX
- INDEX
GDS-2000A Programming Manual
200
Example1
:CHANnel1:LABel "CH1_lab"
Sets the channel 1 label as "CH1_lab".
Example2
:CHANnel1:LABel?
CH1_lab
:CHANnel<X>:LABel:DISPlay
Set
Query
Description
Turns the label on/off for the selected channel or
returns its status.
Syntax
:CHANnel<X>:LABel:DISPlay { OFF | ON | ? }
Related
commands
:CHANnel<X>:LABel
Parameter
<X>
Channel 1, 2, 3, 4
OFF
Turns the file label off for the selected
channel.
ON
Turns the file label on for the selected
channel.
Return parameter
Returns the status of the file label for the selected
channel (ON, OFF).
Example
:CHANnel1:LABel "CH1"
:CHANnel1:LABel:DISPlay ON
:CHANnel1:LABel:DISPlay?
ON
Sets the channel 1 label to "CH1" and then turns
the label display on. The query return shows that
the label is on.
:REF<X>:LABel
Set
Query
Description
Sets or returns the file label for the selected
reference waveform.
Syntax
:REF<X>:LABel {<string> | ?}